Gunsmithing Services
If you or your gunsmith is not set up to do
installations on your rifle action, we can help
Our master gunsmith, Ken Sedon
has been in the custom gunsmithing business for over 25 years.
He was the master gunsmith/machinist for the past 14+ years
for the Montana Rifleman, Inc. He along with the rest of the
staff are highly experienced to do your gunsmithing work right
the first time, every time. If you are looking for a quality
barrel installation, Ken & the team will take care of your
firearm as if it were their own.
We are a complete custom gunsmithing shop. Our service and quality
are unmatched in the industry.
We carry a variety of chambering reamers and are adding new
ones all the time, and if we don't have it, we'll either buy
it or rent it from a reputable company. Check out our barrels
page for cartridges we chamber for.
With all new tooling & new machines to do your chambering
and threading, you are assured of tight tolerances each and
every time.
Standard rebarreling includes chamber, thread, fit & crown.
We can also square & lap your receiver for an additional
cost. See machining services below.
Please note that all chambering services are
done to SAAMI specifications due to liability issues. Chamberings
done outside of these specifications require a customer supplied
chambering reamer and the customer assumes all liability.
| Standard Threads |
|
$60.00 |
| Metric Threads |
|
$90.00 |
| 50 BMG Threads |
|
$120.00 |
| Chambering |
Short |
$72.00
|
| 50 BMG Chambering |
|
$140.00 |
| Special Contouring |
Starts @ |
$35.00 |
| Square & Lap Your Receiver
|
Starts @ |
$50.00 |
| Drill & Tap Holes |
|
Call
for Quote |
| Teflon or similar coating
|
|
Call
for Quote |
| Bluing |
Polished or Matte |
Call
for Quote |
| Sight Installation |
|
Call
for Quote |
| |
|
|
| |
|
|
| Rebarreling Services Ruger
M77 M77 Mk II |
|
$205.00 |
| Savage 110 |
|
$205.00 |
| Remington 700 |
|
$220.00 |
| Remington 600, 660 |
|
$220.00 |
| Remington 7, 721, 722 |
|
$220.00 |
| Ruger #1 or #3 |
|
$335.00 |
| Winchester Model 70 CRF
|
|
$245.00 |
| Winchester Model 70 PF
|
|
$205.00 |
| Weatherby |
|
$250.00 |
| Sako |
|
$205.00 |
| Browning A-Bolt |
|
$225.00 |
| Mauser 96 or 98 |
|
$205.00 |
| Springfield 1903 (800,000+
S/N |
|
$245.00 |
| Springfield 03-A3 (high
S/N) |
|
$245.00 |
| Winchester 1886 Lever |
|
$300.00 |
| Marlin Lever |
|
$300.00 |
| Winchester/Browning Hi
or Lo-Wall |
|
$275.00 |
| Remington Rolling Block
|
|
$275.00 |
| Other Lever Action Rifles
|
|
$300.00 |
Note: Installation prices do not include any
installation of sights, bands, etc.
Customer Service: (406) 755-4907
McGowen Precision Barrels, LLC
740 West Railroad Street, Suite B, Kalispell, MT 59901
©Copyright 2007 McGowen Precision Barrels,
LLC
Custom gunsmithing, custom
rifle barrels, savage barrels, savage pre-fit, accurate reloading,
harry mcgowen, mcgowan barrels, gunsmithing, rifle, customrifle,
kalispell, montana, rebarrel, chamber, cnc, jon frost, custom
action, rifle action, cooper arms, firearms
