image
image
image
image
Rebarreling Services...

McGowen Precision Barrels rebarrels a variety of rifles from bolt actions, single shots to lever actions.

Below you will see a variety of rifles that we rebarrel. The models of the rifles are grouped together under the gunsmithing cost associated with rebarreling that rifle. Keep in mind that the cost shown below for rebarreling the rifle is the actual gunsmith work for chamber, thread, fit and crown. Below each rifle, or group of rifles, there are a series of drop-down menus. The cost for the gunsmith work does not change, but the cost of the barrel and associated items will dependent upon length of barrel, material, contour (standard, octagon or fluted) and finish.

Please note that on all rebarrel work we require a deposit of 25% down prior to any work being completed. Also note that we do not normally take orders for rebarreling work without having the rifle in our hands. If you wish us to start your barrel and then call you when we are ready for your rifle, we would require the same 25% deposit. If you decide to cancel your order, prior to any work being completed we'll refund your deposit. If we have received a rifle from you and you cancel your order prior to any work being completed we will refund your deposit minus shipping & handling charges to send the rifle back. If we have started work on your barrel we will refund your deposit minus 15% restocking fee and (in the case of having your rifle on hand) shipping and handling charges to send your rifle back to you.

To determine the cost of your rebarrel job, select the items that you want on your rebarrel, select none or $0.00 for the items not associated with your rifle (example if you are having the rifle rebarreled with a blued barrel you would select NOT Stainless $0.00) and add the columns up for your total cost (minus shipping & handling) of your rebarrel.

Please Note that "Squaring & Lapping" the receiver and bolt face is not included in the pricing for rebarreling. This is an extra fee as we have realized over the years that not everyone wants this process done or to pay the extra $85.00 fee. If you'd like your receiver squared & lapped, please include this fee into the pricing below.

==================================================================

Ruger M77, Ruger M77 MK II, Savage Rifles, Winchester Model 70 Push Feed Rifles, Sako Rifles, Mauser 96 or 98 Rifles

$205.00

Costs to rebarrel:

Chrome Moly Barrel

Stainless Steel Barrel

Contouring - Contains contours we currently list. Contours not listed add additional $35.00

Fluting

Octagon

Finish

Threading The Muzzle

Muzzle Brake

==================================================================

Remington 700, 600, 660, 788, 7, 721, 722, Browning A-Bolt, Browning X-Bolt

$220.00

Costs to rebarrel:

Chrome Moly Barrel

Stainless Steel Barrel

Contouring - Contains contours we currently list. Contours not listed add additional $35.00

Fluting

Octagon

Finish

Threading The Muzzle

Muzzle Brake

==================================================================

Winchester Model 70 CRF, Weatherby MK V, Weatherby Vanguard, Springfield 1903, Springfield 03-A3

$245.00

Costs to rebarrel:

Chrome Moly Barrel

Stainless Steel Barrel

Contouring - Contains contours we currently list. Contours not listed add additional $35.00

Fluting

Octagon

Finish

Threading The Muzzle

Muzzle Brake

==================================================================

Winchester 1886, 1885 Hi or Low Wall, Remington Rolling Block, Marlin Lever Action Rifles

$300.00

Costs to rebarrel:

Chrome Moly Barrel

Stainless Steel Barrel

Contouring - Contains contours we currently list. Contours not listed add additional $35.00

Fluting

Octagon

Finish

Threading The Muzzle

Muzzle Brake

==================================================================



image
Top of Page