Ruger M77 or M77 Mk II
Price $205.00
The Ruger M77 or M77 Mk II is a straight forward re-barrel job due to it having only a flat breech and no extractor cuts required.

Savage 110
Price $205.00
The Savage is also a very straight forward re-barrel job as it is also a flat breeched barrel. The only difference is whether the customer wants to retain the locking nut for the barrel or put a shoulder on the barrel.

Remington 700
Price $220.00
The Remington 700 is a flat breeched rifle with a bolt recess cut in the breech end of the barrel.

Remington 600 or 660
Price $220.00
Same as the Remington 700, flat breeched with a bolt recess cut.

Remington 7, 721 or 722
Price $220.00
Same as the Remington 700, flat breeched with a bolt recess cut.

Ruger #1 or #3
Price $335.00
The Ruger #1 or #3 are a little more complicated to rebarrel as they have a flat breech with a extractor cut and a firing pin clearance cut. The contour of the barrel is dictated by the forearm hanger attached to the front of the receiver. Also at the customers request we reinstall the factory 1/4 rib.

Winchester Model 70 C.R.F.
Price $245.00
The Winchester Model 70 Control Round Feed (CRF) actions are one of the more complicated bolt actions to rebarrel. The Model 70 has a cone breech and a extractor cut instead of a flat breeched barrel.

Winchester Model 70 P.F.
Price $205.00
The Winchester Model 70 Push Feed (PF) action is a straight forward re-barrel job with a flat breeched barrel and no extractor cuts.

Weatherby Mk V or Vanguard
Price $250.00
The Weatherby is similar to the Remington in that it has a flat breeched barrel with a bolt recess.

Sako
Price $205.00
The Sako is a straightforward re-barrel job with a flat breeched barrel.

Browning A-Bolt
Price $225.00
Another straightforward re-barrel with no extractor cuts, only a flat breeched barrel.

Mauser 96 or 98
Price $205.00
The Mauser 96 or 98 are the forfathers of the modern bolt action rifle. Made by a large number of companies around the world, they still hold their popularity today. Straightforward re-barrel job with a flat breeched barrel.

Springfield 1903
Price $245.00
The 1903 Springfield re-barreling is similar to that of the Winchester Model 70 CRF action as it has a cone breech and an extractor cut.

Springfield 03-A3
Price $245.00
The 1903 Springfield re-barreling is similar to that of the Winchester Model 70 CRF action as it has a cone breech and an extractor cut.

Winchester - Marlin Lever Action Rifles

Price for complete rebarrel with up to a 26" finished ROUND barrel & bluing is $950.00

Price for a complete rebarrel with up to a 26" finished OCTAGON barrel & bluing is $1075.00

The pricing above include necessary dovetail cuts for forearm or magazine tube hangers. This does not include dovetails or drilling and tapping for any sights or scope mounts. Price does not include any modifications to take your rifle from one cartridge to another if they are not the same rim diameter or length. Price to accomplish this is charged at our hourly rate of $65.00 per hour.

Standard Threading
Price $60.00
This is for standard UNF threading on your rifle barrel.

Metric Threading
Price $90.00
This is for metric threading on your rifle barrel.

50 BMG Threading
Price $140.00
This is for standard UNF threading on your 50 BMG rifle barrel.

Standard Chambering
Price $72.00
This is for standard chambering on your rifle barrel. Unless you are a qualified gunsmith the chambering will be "short" requiring a gunsmith to finish chamber the barrel and install. This is done not only for safety but liability reasons. If customer supplies a "custom" chamber reamer, the customer assumes all liability for the chamber.

50 BMG Chambering
Price $140.00
This is for standard chambering on your 50 BMG rifle barrel. Unless you are a qualified gunsmith the chambering will be "short" requiring a gunsmith to finish chamber the barrel and install. This is done not only for safety but liability reasons.

Special Contouring
Price $35.00
This is a programming charge for any contour not currently shown in our list of contours.

Square & Lap Your Receiver
Price $80.00
This is for squaring the face of your receiver and lapping the bolt lugs. This does not include squaring your bolt face or any squaring of the action other than what is mentioned.

Drill & Tap
Price $15.00 per hole
This is for drilling & tapping your receiver or barrel for sights or scope mounts. Price is "per hole"

Bluing
Price Starts at $120.00
This price is for bluing your complete rifle action and barrel. Price starts at $120.00 for a "standard" polished finish or matte finish. High Polish finishes are available starting at $180.00